Trimming With Comb - Philips 9000 Serie Manual De Usuario

3 Press the on/off button to switch on the appliance.
4 Hold the appliance in the position that is most convenient for the
area you want to trim and make strokes in the desired direction.
Tip: For a comfortable trim close to your skin, place the flat side of the
trimming head against your skin and make strokes in the desired direction.
5 When you are finished, press the on/off button to switch off the
appliance.

Trimming with comb

The appliance comes with two combs: a standard comb and a precision
comb. These combs keep the trimming head at a certain distance from
your skin. This distance determines the remaining hair length and can be
adjusted by turning the zoom wheel.
- Use the standard comb to trim your beard.
- Use the precision comb to trim hard-to-reach areas, for instance under
your nose.
1 Slide the comb into the guiding grooves on both sides of the
appliance ('click').
Note: The comb does not fit on the trimming head when the 15mm (0.6in)
side is pointing towards the front of the appliance. If this is the case, turn the
trimming head before you slide the comb onto the trimming head.
2 Turn the zoom wheel to select a length setting.
- The length setting selected lights up on the front of the appliance.
- You can select a length from 0.4mm to 7mm (see table in section
'Length settings' below).
English
11