Idiomas disponibles
Idiomas disponibles
Betriebsanleitung
Fix the FS 8.8 cabinet to the sump
1.
Put the cabinet on the sump as shown in diagram 1 and screw them together in accordance with the
digrams.
2.
Place the grid on the lip at the bottom of the cabinet.
3.
Fix the assembled cabinet to the angles on the sump using dowels and screws.
Fix the FS 8.16 cabinet to the sump
1.
Put the cabinet on the sump as shown in diagram 1 and screw them together in accordance with the
digrams.
2.
Place the grid on the lip at the bottom of the cabinet.
3.
Fix the assembled cabinet to the angles on the sump using dowels and screws.
6. Specifications
See type lable.
7. Operation
After opening the doors the drums can be placed in the storage system using suitable equipment.
When storing combustible fluids comply with the fire and explosion protection regulations!
Check drums are positioned safely and secure to prevent falling over or down!
Only store drums horizontally on drum stands!
Safe filling is possible over the collecting sump.
Access to the storage system by unauthorised persons is prohibited!
8. Maintenance and servicing
The inspection and maintenance must be carried out in accordance with the instructions of the general
operating instructions enclosed in the annex.
Doors and collecting sump must be inspected at regular intervals for good condition.
Check the firm hold of the screwed connections.
Grease the locks and hinges with commercial grease where necessary.
When replacing parts only the manufacturer's original parts may be used!
Fass-Schrank 8.8 / 8.16
114666, 114668, 114672, 114670
Seite 6 von 12 Seiten
Ausgabe 06/2007
