Troubleshooting Guide - VISIOMED TensioFlash Manual Del Usuario

Memory Stores 60 last readings.
Power source 2 x 1.5V "AAA" alkaline batteries
Battery life > 50 readings (once a day, at room temperature: 22°C)
Working
5~40°C (40~104°F)
Temp. &
<85% RH
humidity
Storage Temp. -20~55°F (-4~131°F)
& humidity ≤95% RH
External
340mm (L)/ 72mm (W)/ 30mm (H)
dimensions
Weight Approx. 140g (Device and Batteries)
Cuff (wrist circumference 13.5 ~ 19.5 cm). User
Accessories
manual, Case, 2 batteries -1.5V AAA
Voltage 3 Volts DC
The manufacturer reserves the right to modify the product technical specifications without prior
notice.

16. TROUBLESHOOTING GUIDE

If any of the following problems occur when using your TensioFlash®, please refer to this
troubleshooting guide. If the problem persists, please contact our customer service at 0 892 350 334
(0,40€/mn).
28 Visiomed - KD-795 - Manuel d'utilisation - 022019
PROBLEM POSSIBLE CAUSE
No battery inserted
Nothing is displayed
when the START/ The batteries are used
STOP button is
The batteries are not placed in
pressed
the correct polarity direction
The cuff position was not
correct or it was not properly
tightened
The body posture was
Screen displays
not correct during the
abnormal results
measurement
You moved during the
measurement or you were not
sufficiently relaxed.
Measurement error
Blood pressure measurement
(the screen displays
impossible
EE)
Visiomed - KD-795 - Manuel d'utilisation - 022019
SOLUTION
Insert batteries
Insert new batteries
Observe battery polarity
Apply the cuff correctly and try again
Review the suggestions before
measurement
Do not move during the
measurement. Relax for 10 minutes
before taking your blood pressure.
Press the START button in order to
restart the measurement.
Check the position of the cuff on the
wrist.
Check the position of the body during
the measurement.
Do not speak or move during the
reading.
29