Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Read your entire Lumis
Setup
1
With the device on a stable level surface
below head height, connect one end of the
power cord into the power supply unit and
the other end into the power outlet.
3
Connect the air tubing firmly to the air outlet
located on the rear of the device.
5
Close the humidifier and insert it into the
side of the device.
Note: It is recommended to place the device on a heat resistant pad to avoid possible heat damage
to surfaces.
HFT User Guide before use.
™
2
Fit the tubing wrap around the air tubing.
4
Open the humidifier and fill it with water up
to the maximum water level mark.
6
Connect the free end of the air tubing firmly
onto the high-flow nasal cannula.
English 1
Tabla de contenido
