How To Operate The On-Screen Menu - Eiki LC-X85 Guía De Referencia Rápida

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in the owner's manual (CD-ROM).
Press the MENU button on the side control or the
1
remote control to display the On-Screen Menu.
Use the Point 7 8 buttons to select a Menu icon. Use
2
the Point ed buttons to select an item in the selected
menu.
Press the SELECT button to show the item data. Use
3
the Point 7 8 buttons to adjust the values.
To close the On-Screen Menu, press the MENU button
again.
✔
Note:
• The selected item is not active until the SELECT button is pressed.
On-Screen Menu
Menu bar
Pointer (red frame )
Press the Point
ed
to move the pointer.
Item
Operating with Projector Control
Lens Operation
The following lens operation can be made with the Lens
button on the side control.
Press the LENS button to enter each lens operation mode.
The selected adjustment display appears on the screen.
Zoom Adjustment
Display "Zoom" on the screen. Use the Point
to zoom in and out the image.
Focus Adjustment
Display "Focus" on the screen. Use the Point
to adjust focus of the image.
Lens Shift Adjustment
Display "Lens shift" on the screen. Use the Point
buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 50 percent, or
sideways up to 10 percent from the central axis of the
lens shift.
Shutter Function
Shutter function allows you to completely block out light
to the screen. Press the SHUTTER button to close the
shutter inside the projector. To open up the shutter, press
the SHUTTER button again.
Menu icon
Pointer
(red frame )
buttons
ed buttons
ed buttons
ed7 8
- 18 -
Side Control
MENU button
SELECT button
POINT buttons
Remote Control
MENU button
Press the
SELECT
button here
to display
previous
items.
Press the
SELECT
button here
to display
next items.
Quit
Exit this menu.
Zoom ➜ Focus ➜ Lens Shift ➜
ZOOM
FOCUS
POINT buttons
SELECT button
Item data
Press the Point 7 8
buttons to adjust the
value.
• • • • •