Adding/Deleting Additional Cameras - Reer BabyCam XL Instrucciones De Uso

Functional possibilities:
Camera
1. When the camera is transmitting, the transmission indicator (3) lights
up blue. As soon as your baby becomes quiet and makes no more
sound, the camera stops transmitting. It then goes into stand-by mode
until noises are detected again. This reduces the radiation exposure to
a minimum.
2. The night light can be switched on and off using the display. You can
select whether it should be on, off, or in VOX mode. The brightness can
be adjusted on the back of the camera (7+8).
3. The display can be used to control the playback of lullabies. 6 different
songs are factory preinstalled. They can be played once, repeatedly or
in a continuous loop. The volume can be adjusted in the menu navi-
gation.
4. When lighting is sufficient, the camera transmits a colour image to
the display. If the surroundings are no longer bright enough, the night
vision mode is automatically activated. In this case, only a black and
white image will be transmitted.
5. You can rotate the camera continuously by 330° and tilt it 110° using
buttons 17–20 on the display.
6. If you enable the Follow Movement option, the camera automatically
follows the movement within the movement radius.

Adding/deleting additional cameras

1. Briefly press the pairing button (24) on the parent unit using a thin
object.
2. Add: Use the arrow keys to select Add Camera and press the OK key
(14) to confirm. Remove: Use the arrow keys to select Remove Camera
and press the OK key to confirm.
3. Use the arrow keys to select the camera you want to add or remove
and confirm your selection with the OK key (14).
4. Now press the pairing button (10) on the underside of the camera
within 30 seconds and then wait for about 5 seconds. A successful
coupling is then confirmed by a double beep and a confirmation mes-
sage on the screen. If the confirmation does not appear, please repeat
steps 2–4.
5. Repeat the steps for all other cameras. Please note: If you select a save
location that is already occupied, the existing data will