Tabla de contenido
Idiomas disponibles
Idiomas disponibles
When the time is set, it will begin to count down immediately. The
display will show the remaining time .
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
When cooking timer expires, the corresponding cooking zone will
be switched off automatically.
Other cooking zone will keep operating if they are turned on previously.
The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking
zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes.
The shown as below:
Once the countdown timer expires, the corresponding zone
will switch off. Then it will show the new min. timer and
the dot of corresponding zone will flash.
The shown as right:
Touch the heating zone selection control, the corresponding timer will be shown in the timer indicator.
c) Cancel the timer
Touching the heating zone selection control that you want
to cancel the timer.
Touching the timer control, the indicator flash.
Touch the slider control to set the timer to "00", the timer is cancelled.
3.3.9 Default working times
Auto shut down is a safety protection function for your induction hob. It shut down automatically if ever
you forget to turn off your cooking. The default working times for various power levels are shown in the
below table:
Power level
Default working timer (hour)
When the pot is removed, the induction hob can stop heating immediately and the hob automatically
switch off after 2 minutes.
set more zones:
(set to 15 minutes)
(set to 45 minutes)
1
8
、、、
(set to 30 minutes)
2
3
4
8
8
4
13
5
6
7
4
4
2
8
9
2
2
Tabla de contenido
Solución de problemas
