Connecting The Pressure Washer To The Power Supply; Connecting The Pressure Washer To An Electric; Power Supply; Switching The Pressure Washer On And Off - Stihl RE 90 Manual De Instrucciones

English
9 Connecting the pressure washer to the

power supply

9.1

Connecting the pressure washer to an electric

power supply
3
2
3
► Set the toggle switch to the 0 position.
► Remove the connecting cord (2) from the holders (3).
► Plug the plug of the connecting cord into a correctly
installed socket.
10 Switching the pressure washer on and
off

10.1 Switch on high-pressure washer

When the pressure washer is switched on, voltage
fluctuations may occur under unfavorable mains conditions.
The voltage fluctuations may negatively affect other
connected electrical appliances. Observe line impedance,
@ 19.
56

9 Connecting the pressure washer to the power supply

1
► Set the rocker switch to position I.

10.2 Switching off the pressure washer.

► Set the toggle switch to the 0 position.
0458-002-9821-A