Install The Handle - Kohler K-705800 Guia De Instalacion

Inside Handle
Outside Handle
Hex Wrench
Screw
Inside Bracket
Outside Bracket
Bushing

12. Install the Handle

Identify the inside handle and brackets – with non-threaded holes. Assemble the inside brackets and
handle with 2 #8 x 4-1/2" flathead screws as shown.
Place a bushing onto each screw as shown.
Position the inside handle assembly onto the door panel by carefully inserting the two screws
through the holes in the glass.
Place a second bushing onto each screw and into the glass holes.
Assemble the outside brackets and handle as shown and attach to the inside handle by
hand-tightening the screws.
NOTICE: Do not overtighten. Overtightening can cause damage to the door panel.
Using the 3/32" hex wrench provided, tighten the screws to secure the handle in place.
1144162-2-B 16 Kohler Co.