Kohler K-705800 Guia De Instalacion página 11

#6 x 1/2"
Flathead Screw
7. Install the Strike Jamb
Position the latch in the strike jamb.
Using the 5/64" hex wrench provided, secure the latch in place using two #6 x 1/2" flathead screws.
Repeat for the second latch.
Carefully slide the seal into the T-slot on the strike jamb. Do not trim the seal.
Cut a horizontal slit in the flap of the seal 1-1/2" (3.8 cm) from each end.
Insert the strike jamb into the wall jamb as shown. Temporarily secure it in place using masking
tape.
Kohler Co.
Latch
Strike Jamb
Slit
Strike
Seal
T-slot
Strike Seal
11
1-1/2"
(3.8 cm)
Strike Jamb
1144162-2-B