V2 ATRIS-700 Instrucciones página 45

PARAMETER VALUE
AUS
tiM
biSt
Mon
riLA
0
1 - 10
FinE
no
Si
DESCRIPTION
The light is controlled by means of channel 4 of the receiver
TIMER: the light turns on when channel 4 receives an enabling signal and
turns off after the time set in parameter
BISTABLE: the light turns on/off each time channel 4 receives an enabling
signal
MONOSTABLE: the light remains lit as long as channel 4 receives an
enabling signal;
Motor release on closing limit switch
When the door halts against the closing limit switch, the motor is
controlled for a fraction of a second in the opposite direction, decreasing
the motor gear tension
Function disabled
Time motor release (max. 1 second)
End of programming
From this menu you can save any modified parameters and finish the
programming phase
Do not exit the programming menu
Stores the settings and exits the programming menu
LUCi
- 43 -
DEFAULT MEMO
tiM
0
no