HANDLEBAR ADJUSTMENT
To adjust the height of the handlebar, use knob (A) located on the front of the bicycle.
To adjust the position of the handlebar, use knob (B) located below the handlebar (only on the TOUR-S
model).
See figures below.
After defining the adjustment for both the height and the position of the handlebar, it is necessary to tighten
the knobs again to fix the position defined.
ADJUSTMENT OF THE CHAIN (Only of the TOUR-S model)
The chain of your bicycle (TOUR-S) was pre-adjusted and does not require immediate attention.
The continuous use of the bicycle can, over time, cause it to become loose.
So when you pedal and you notice that the chain is slipping, it will need to be adjusted.
Use an I-key to adjust the bolts on both sides of the bicycle.
Turn the two bolts clockwise and then pedal the bicycle to see whether the chain still slips.
If it does, repeat the procedure against until the chain no longer slips.
ADJUSTMENT OF THE CHAIN (Only of the TOUR model)
AJUSTE DA CORRENTE (Somente no modelo TOUR)
The chain of your bicycle (TOUR) was pre-adjusted and does not require immediate attention.
A corrente da sua bicicleta TOUR, foi pré-ajustada e não necessita de imediata atenção.
Its continuous use can, over time, cause it to become loose.
O uso contínuo da mesma pode, com o tempo, causar seu afrouxamento.
If necessary, release the flywheel and align it, and stretch the chain using a 10mm spanner and a 15mm
Caso necessário, solte o volante e faça o alinhamento do mesmo e estique a corrente utilizando uma chave
fixa de 10mm e uma de 15mm para o procedimento em ambos os lados do equipamento (direito e esquerdo).
spanner for the procedure on both sides of the equipment (left and right).
LUBRIFICATION OF THE FELT OF THE SHOE (Both
models) After every 10 hours of use, lubricate the felt
inside the brake shoes (left and right) with 5 drops of
Movelub lubricant.
Adjustments 5-2
Adjustments
lubricate the felt with drops
of movelub every 10 hours
of use
Felt
shoe