RECARO C 6000 Manual De Montaje página 54

R
3. Screw the rear screws (2) from the installation kit into the adapter (finger-tight only).
4. Move the seat as far back as possible and activate the cushion tilting mechanism.
5. Screw the front screws (3) from the installation kit into the adapter (finger-tight only).
S
6. Use the original screws (1) to secure the control module in place (if available) (Torx adapter T30)
RECARO Automotive Seating
1 RECARO seat
2 Rear screws - M8 x 20 from installation
kit
3 Front screws - M8 x 20 from installation
kit
1 Control module screws
Page 23