Dismantling The Eps 2 Module And The Adapter Bridge - RECARO C 6000 Manual De Montaje

3.4 Dismantling the EPS 2 module and the adapter bridge

I
1. Venting hose (1) - grey - cut approx. 5 cm away from the adapter bridge (hose cutter).
2. Detach the air supply connection (2) from the adapter bridge (14 mm
3. Detach the electrical plug connection (3) from the adapter bridge. Use a suitable tool to undo the
catch.
J
4. Pull the EPS 2 module cover (1) upwards.
5. Remove the cable tie (3).
6. Unlock the electrical plug (2) and then remove the EPS cable. Store the cable safely so that the EPS
module can be refitted to the standard seat.
7. Loosen and remove the three screws (4) on the armrest holder (size 5 & 6 hexagon sockets). Store
the screws safely so that the EPS module can be refitted to the standard seat.
8. Store the armrest with the EPS module carefully as it is needed for use with the RECARO seat.
RECARO Automotive Seating
1 Venting hose
2 Air supply hose
3 Electrical connections

mandrel or relevant socket).
1 EPS module cover
2 Electrical connection
3 Cable tie
4 Armrest holder screws
Page 15