Fitting The Adapter Bridge In The Seat Box - RECARO C 6000 Manual De Montaje

3.8 Fitting the adapter bridge in the seat box

O
1. Press the brass connector (1) supplied with the hose/cable harness adapter in the installation kit into
the adapter bridge (2).
2. Screws the adapter bridge onto the seat box using the screws (7) that you removed earlier (T20 Torx
adapter).
3. Fit the air connection (4) for the air pistol (if supplied).
4. Fit the electrical connections (5) and the air (6) connections.
5. Use the cable tie (3) from the installation kit to secure the cable in place.
Warning:
During the installation, ensure that the electrical and pneumatic connections do not become
contaminated or damaged, in order to guarantee a secure contact.
RECARO Automotive Seating
1 Brass connector
2 Adapter bridge
3 Cable tie
4 Air pistol connection
5 Electrical connections
6 Air connections
7 Adapter bridge screws
Page 20