Tabla de contenido
Motor stops:
See comments under "Typical Bread
Dough Problems and Solutions."
Dough doesn't rise:
See comments under "Typical Bread
Dough Problems and Solutions."
Always insert chopping blade in the work
bowl before putting ingredients in bowl.
When slicing or shredding food, always
use the pusher. Never put your fingers or
spatula into feed tube.
Always wait for the blade or disc to stop
spinning before you remove the pusher
assembly or cover from the work bowl.
Always unplug the unit before removing
food, cleaning, or putting on or taking off
parts.
Always remove work bowl from base of
machine before you remove chopping
blade.
Be careful to prevent the chopping blade
from falling out of the work bowl when
emptying the bowl. Remove blade before
tilting bowl, or hold it in place with your
finger, a spatula or a spoon.
TECHNICAL DATA
The motor in your food processor
operates on standard line operating
current. The appropriate voltage and
frequency for your machine are shown on
the lower housing under the base.
An automatic, temperature-controlled
circuit breaker in the motor ensures
complete protection against motor
burnout. If the processor runs for an
exceptionally long time when chopping,
mixing or kneading a thick or heavy
mixture in successive batches, the
motor may overheat. If this happens, the
processor will stop. Turn it off and wait
for the motor to cool before proceeding.
It will usually cool within 10 minutes. In
extreme cases, it could take an hour.
Safety switches prevent the machine
from operating when the work bowl or
the cover is not locked into position.
The motor stops within seconds when
the motor is turned off, and a fast-stop
circuit stops it instantly when the pusher
assembly is removed.
Cuisinart offers a Limited Three-Year
Warranty on the entire machine.
CLEANING AND
MAINTENANCE
Keep your food processor ready to use
on a kitchen counter. When not in use,
leave it unplugged.
Store the blade and discs as you
would sharp knives, out of the reach of
children. The disc and blade holders are
optional accessories which offer safe and
convenient storage.
All parts except the housing base are
dishwasher safe, and we recommend
washing them in the dishwasher on the
top rack only.
Due to intense water heat, washing the
work bowl and work bowl cover on the
bottom rack of your dishwasher may
cause damage over time. Insert the work
bowl upside down. Remember to unload
the dishwasher carefully wherever you
place the sharp blade and discs.
To simplify cleaning, rinse the work bowl,
cover, pusher assembly and blade or
disc immediately after use, so food won't
dry on them. Openings at the bottom of
the large pusher provide drainage and
make cleaning easy. If food lodges in
the pusher, remove it by running water
through it, or use a bottle brush.
If you wash the blade and discs by hand,
do it carefully. Avoid leaving them in soapy
water where they may disappear from
sight. To clean the metal blade, fill the work
bowl with soapy water, hold the blade by
its plastic center and move it rapidly up
and down on the center shaft of the bowl.
Use of a spray attachment is also effective.
If necessary, use a brush.
The work bowl is made of plastic, which
is shatter resistant and heat resistant.
17
Capítulos
Tabla de contenido
