Transport And Storage; Assembly; Required Tools; Assembling Vm350 Power Supply Module - Bosch VM350 Manual De Instrucciones

34/112 Bosch Rexroth AG
5

Transport and storage

For storing and transporting the product,
always observe the ambient conditions
specified in the technical data (see
"Technical data" on page 37).
6

Assembly

When installing the product, always observe
the ambient conditions specified in the
technical data (see "Technical data" on
page 37).

Required tools

• Screwdrivers
for the front panel: 0.8 x 4.5 mm
for X1S1: 0.6 x 3.5 mm
for XDN2: 0.4 x 2.5 mm
VM350 | 3 609 929 B32/2008-09
Assembling VM350 power supply
module
CAUTION
Risk of damage to persons
and property!
Assembly of the VM350 power
supply module requires basic
mechanical and electrical
knowledge.
y Only qualified personnel (see
"Personnel qualifications" on
page 22) are authorised to as-
semble the VM350 power
supply module.
y Measures to prevent electro-
static discharge (ESD protec-
tion) must be undertaken to
protect the module and sys-
tem components during all as-
sembly work.
CAUTION
Risk of injuries when
assembling under voltage!
If you do not switch off the power
supply to the system components
before the start of assembly, you
may become injured or the
VM350 power supply module or
system components may be
damaged.
y Isolate the relevant system
components before assem-
bling the VM350 power sup-
ply module.