same time until the indicator
goes off.
You can activate this option:
• After you press Inicio/Pausa: the options and
the programme knob are locked.
• Before you press Inicio/Pausa: the appliance
cannot start.
Acoustic signals
The acoustic signals operate when:
Before first use
1. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2. Put a small quantity of detergent in the
compartment for washing phase.
Daily Use - Washing only
Loading the laundry
Open the water tap. Connect the mains plug to
the mains socket.
1. Pull the door handle to open the appliance
door.
2. Put the laundry in the drum, one item at a
time.
3. Shake the items before you put them in the
appliance.
Make sure not to put too much laundry in the
drum. Refer to max. loads indicated in
"Programme chart".
4. Close the door.
www.zanussi.com
comes on/
CAUTION!
Make sure
that no
laundry
stays
between the
seal and the
door. There
is a risk of
water
leakage or
damage to
the laundry.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic signals,
press Aclarado/Enxag.Extra and Tiempo/Tempo
de sec. at the same time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate when
the appliance has a malfunction.
3. Set and start a programme for cotton at the
highest temperature without laundry.
This removes all possible dirt from the drum and
the tub.
Detergent compartments
Detergent compartment for prewash
phase.
Detergent compartment for washing
phase.
Compartment for liquid additives
(fabric conditioner, starch).
Using detergent and additives
Setting a programme
1. Turn the programme knob to switch the
appliance on and set the programme:
• The indicator of the button Inicio/
Pausa flashes.
• The display shows the programme
duration.
1. Measure out the
detergent and the
fabric conditioner.
2. Carefully close the
detergent drawer.
11