Installation - Zanussi ZWT 71401 WA Manual De Instrucciones

Ocultar thumbs Ver también para ZWT 71401 WA:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Problem
The appliance makes an
unusual noise.
The washing results are
not satisfactory.
You cannot set an option.
The machine does not dry
or does not dry properly:
The laundry is full of differ-
ent coloured fluff:
After the check, activate the appliance. The
programme continues from the point of
interruption.
If the problem occurs again, contact the
Authorised Service Centre.
If the display shows other alarm codes.
Deactivate and activate the appliance. If the
problem continues, contact the Service.

Installation

WARNING!
Refer to Safety chapters.
www.zanussi.com
Make sure the levelling of the appliance is correct. Refer to 'Instal-
lation'.
Make sure that the packaging and/or the transit bolts are removed.
Refer to 'Installation'.
Add more laundry in the drum. The load may be too small.
Increase the detergent quantity or use a different detergent.
Use special products to remove the stubborn stains before you
wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
Make sure that you press only the wanted touch button(s).
Make sure that you have set a suitable drying programme for your
laundry.
Make sure that you set the correct the drying time or dryness de-
gree.
Make sure that the water tap is not turned on.
the drain filter is not clogged.
Make sure you have not overloaded the appliance.
The fabrics washed in the previous cycle released fluff of a different
colour.
Clean the clothes with a fluff remover
The drying phase helps to eliminate some fluff.
In case of an excessive amount of fluff in the drum, refer to section
«FLUFF IN THE FABRICS».
Service
We recommend the use of original spare parts.
When contacting the Authorised Service
Centre, make sure that these data are available.
You can find the information on the rating plate:
model (Mod.), PNC (Prod.No.), Serial number
(Ser.No.).
Cleaning the inlet hose and the valve
filter
Possible solution
Remove all transit bolts and packing
before you use the appliance. You
are advised to keep all transit
devices so t hat they can be refitted
if the appliance ever has to be
transported again.
21

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido