Description Of The Unit; Description; Dmp Exploded Diagram - AERMEC DMP Serie Manual Del Usuario

4.

DESCRIPTION OF THE UNIT

The DMP range dehumidifiers are ap-
pliances designed to be coupled with coo-
ling plants with radiating panels. They are
characterised by silent functioning, small
electricity consumption and high dehumi-
dification efficiency.
The units have been designed for vertical
wall installation. The dehumidifier has an
electrostatically pre-charged air filter and
condensate drip tray, circuit board for
adjustment with remote control panel. It
has a series of pre and post cooling coils
thus guaranteeing optimal performance
and control of the temperature of the
treated air.
However, the units can also function wi-
thout the aid of pre and post cooling wa-
ter coils and this characteristic can be
4.2.

DMP EXPLODED DIAGRAM

KEY
1 Fan
2 Heat exchanger
3 Compressor
4 Air vent valve
5 Microprocessor board
6 Air filter
MANDATORY ACCESSORY (DMP 20GL)
7 Cassaforma system
8 Front closure panel
9 Frame
6
very useful in the intermediate seasons
when, for example, dehumidification must
be performed with the cooling plant off.
In the winter season the dehumidifier can
be used to accelerate the normal wor-
king conditions of the temperature of the
rooms heated by the radiating plant (fan
only activation - this function is active with
hot water temperature that powers the
coils above 34°C and with room tempe-
rature below 18°C)
The unit is subjected to sealing tests, idle
cycle and is loaded with ecological refri-
gerants. The dehumidifier undergoes a
complete functional inspection before
delivery in order to guarantee the com-
pliance with the European Directives. It
has CE marking and relative certificate of
conformity.
4. 1 .

DESCRIPTION

The DMP is designed to guarantee the
dehumidification of the air in thermically
neutral conditions, i.e. at the same tem-
perature at which is withdrawn. Its pecu-
liarity is that it can be recessed into the
wall, perfectly integrating into the envi-
ronment, both in residential buildings and
tertiary buildings.
7
8
9