Tabla de contenido
Idiomas disponibles
Idiomas disponibles
840195500 ENv03.qxd:840124300 ENv02.qxd
To Change Voltage
Make sure the unit is unplugged.
• For 120 volts: Slide switch to the right.
• For 240 volts: Slide switch to the left.
If using 240 volts, you must use an
appropriate adapter plug.
NOTICE: Damage to unit and garments
may occur if unit is operated at 240V with
switch set to 120V.
To Dry Iron
1. With travel iron/steamer unplugged, press the Handle Release/
Lock Button (labeled PUSH on heel rest of iron) and pull up
handle until it locks into position.
2. Make sure Dual-Voltage Switch is set to correct voltage and
then plug travel iron/steamer into power supply.
3. Slide Steam Switch to the
prevent water leakage.
4. Turn Temperature Control Dial to desired
temperature. With travel iron/steamer
resting on heel rest, allow 3 minutes for
travel iron/steamer to reach desired
temperature. Do not preheat travel iron/
steamer with soleplate facing down.
5. To turn travel iron/steamer off, turn
Temperature Control Dial to O (OFF).
6. Unplug travel iron/steamer. Allow to cool completely before
returning handle to storage position and placing travel
iron/steamer in storage bag.
9/24/10
1:48 PM
(Dry Iron) position. This will also
6
Page 6
To Steam Iron
1. With travel iron/steamer unplugged, press the Handle Release/
Lock Button (labeled PUSH on heel rest of iron) and pull up
handle until it locks into position.
2. Remove Water Tank Plug. Slowly pour 2 ounces (60 ml) of tap
water into water tank opening up to the MAX Fill Indicator.
Replace Water Tank Plug.
3. Make sure Dual-Voltage Switch is set to correct voltage and
then plug travel iron/steamer into power supply.
4. Turn Temperature Control Dial to desired temperature. With
travel iron/steamer resting on heel rest, allow 3 minutes for
travel iron/steamer to reach desired temperature. Do not pre-
heat travel iron/steamer with soleplate facing down.
5. Slide Steam Switch to the
6. For steam burst, press Steam Button on handle.
7. To turn travel iron/steamer off, turn Temperature Control Dial
to O (OFF).
8. Unplug travel iron/steamer. Empty water from the travel iron/
steamer water tank following directions in "Caring for Your
Travel Iron/Steamer." Set Steam Switch to
position.
9. Allow to cool completely before returning handle to storage
position and placing travel iron/steamer in storage bag.
(Steam) position.
(Dry Iron)
7
Tabla de contenido
