Italtecnica Mito Instrucciones Para El Uso página 23

CONNECTION OF THE ELECTRIC PUMP
This device is suitable for operation with pumps with nominal frequency of 50Hz or 60Hz and power up
to 750 Watt. The device incorporates an internal 15A fast-acting protection fuse.
The recommended diameter of the cables is 1.0mm
pump is 5 meters.
The type of electric cable must be suitable for the conditions of use (use in domestic premises, dry or wet,
for indoor or outdoor installation).
Furthermore, follow the pump manufacturer instructions to which Mito is to be connected.
WARNING:
- All wiring must be performed by specialized personnel.
- Incorrect connection of the electric motor can damage the device and the pump motor.
- Failure to comply with the instructions given in this paragraph may result in serious damage to
property and/or personal injuries for which the manufacturer disclaims all responsibility.
- If the power supply cable or the cable connecting Mito to the electric pump is damaged, it must be
replaced exclusively by the manufacturer or by authorized or qualified personnel in order to
prevent risks of damage or injury.
CONNECTION TO AUXILIARY CONTACT
Mito can be installed on 230V AC single-phase pumps,
already fitted with a capacitor. Before connecting to the power
supply, check that the connections inside the electrical terminal
box of the motor are connected in compliance with the
m a n u f a c t u r e r ' s i n s t r u c t i o n s . T h e d i a g r a m ( s h o w n l e f t ) g i v e s a
typical example of connection.
If the terminals supplied are not used, the crimping of the
faston terminals must be performed by specialized personnel,
by using specific pliers.
2-
; the maximum length of the connection cable to the
Mito is fitted with a connector through which an auxiliary
contact is available which allows the use of additional
features by interfacing the device with other external
equipment. The terminal strip provides an input to enable or
disable pump operation and an alarm relay output (N.O.
contact) which trips at every device anomaly.
CONNECTOR
AUXILIARY CONTACT
23