Kichler 60 Zenith Led Manual De Instrucciones página 8

HANGING THE FAN
(continued)
Supply wires
Step 6. Loosen the two set screws and remove the hitch pin and
Downrod
retaining clip from the coupling on top of the motor assembly. (Fig.
8)
Set screws
Retaining clip
Set screws
Step 7. Carefully feed the electrical lead wires from the fan up
Hitch pin
through the downrod. Thread the downrod into the coupling until
the Hitch pin holes are aligned.
Next, replace the hitch pin and retaining clip. Tighten both set
screws. (Fig. 8)
Fig. 8
8 | KICHLER.COM