Installing The Batteries; Operating Instructions - Kichler 60 Zenith Led Manual De Instrucciones

INSTALLING THE BATTERIES

Remove the face plate of the Wall Switch by lifting at the top and
then insert the supplied 12V battery. Duracell MN21/Eveready
A23/GP 23A all 12V.
Replace the switch face plate.
To prevent possible damage to the transmitter, remove these
batteries if not used for long periods of time (months).

OPERATING INSTRUCTIONS

HI Button = High Speed
MED Button = Medium Speed
LOW Button = Low Speed
FAN OFF Button = Motor Off
Light Button = the "LIGHT" button turns the light ON or OFF
and also controls the brightness setting. (Fig. 22)
Press and hold either button to set the desired brightness level. The
next time you turn the light on, the system will remember this
setting.
Press and release either button to turn the light ON or OFF.
This control system is NOT designed to "Reverse" the rotation of
the blades. To set the fan blades in reverse, the reverse slide switch
is located on the top of the motor housing.
16 | KICHLER.COM
HI
LIGHT
MED
LOW
ON ECE
FAN OFF
1 2 3 4
Fig. 21
Fig. 22