Hanging The Fan - Kichler 60 Zenith Led Manual De Instrucciones

HANGING THE FAN

REMEMBER to turn off the power before you begin.
To properly install your ceiling fan, follow the steps below.
Step 1. Remove the decorative canopy bottom cover from the
canopy by turning the cover counter clockwise. (Fig. 5)
Step 2. Remove the ceiling mounting bracket from the canopy by
removing (and save one of the two screws. Loosen the remaining
screw by a half turn. (Fig. 5)
Step 3. Pass the 120 volt supply wires from the ceiling outlet box
through the center of the ceiling mounting bracket. (Fig. 6)
Step 4. Attach the ceiling mounting bracket to the outlet box using
the screws and washers included with the outlet box. (Fig. 6)
Step 5. Remove the hanger ball from the downrod assembly by
loosening the set screw, unscrewing and removing removing the
cross pin and unscrewing the ball off the rod. (Fig. 7)
Hanger bracket
Ceiling
canopy
Canopy
cover
Fig. 5
UL Listed
electrial
box
Ceiling
hanger
bracket
Cross pin
Hanger
ball
Set screw
Downrod
Fig. 7
Washers
120V Wires
Mounting screws (supplied
with electrical box)
Fig. 6
60" ZENITH LED | 7
TM