Idiomas disponibles
Idiomas disponibles
DE
GB
FR
INTRODUCTION
Use protective work gloves, protective footwear, hard hat and safety
goggles.
NL
Misuse:
-
This product should only be used as described in this
ES
documentation; any other use is considered improper.
-
The manufacturer accepts no responsibility for any
damage caused by the incorrect or unreasonable use of
IT
the equipment.
-
Moreover, misuse shall also void the warranty.
PT
Take care of your tools:
-
Be sure to store your tools in a clean state.
PL
-
Place the tools inside their original package.
DA
WARNINGS
This tool set should be used by experienced
EL
personnel only.
Special tool sets to disassemble and remove blocked injectors
directly on the car.
Injector removal options
1. Removal of the complete injector by means of a fork extractor
Advantage: there is no need to perform a partial removal; the
injector can be reused.
2. Removal of the injector on the original thread – the injector's
main body is unscrewed.
3. Removal of the damaged injector through its restored thread.
The injector is removed using the tools included in the set. A new
M16x1.5 support thread is made in the socket at the end of the
injector. Now you can screw in the M16x1.5 thrust screw and
remove the remaining part of the injector.
For particularly blocked injectors, it is advisable to use our 12-TON
mechadraulic cylinder, 1952 004 080.
Warning: does not apply for use with the fork extractor.
18
METHOD OF PREPARATION
1
2
3
4
5
