Manual del operario
Seguridad general
Señales de seguridad y sus ubicaciones
114389
DANGER
28236
WARNING
Read and understand Operator's
Manual, Responsibilities Manual and
Safety Manual and all safety signs
before using or maintaining machine.
If you do not understand the
Improper operation or
information in the manuals, consult
maintenance can result in
your supervisor, the owner or the
serious injury or death.
manufacturer.
114416
DANGER
Stop all movement.
Tip-over Hazard
If tilt-alarm
sounds, unit is
on a severe
•Read operator's
slope. Death or
manual before
serious injury
attempting to move
will result.
machine.
114416 A
6
1000262
147793
97579
28236 D
Platform uphill:
1Lower boom.
2Retract boom.
Tip-over Hazard
Welder power supply
reduces rated platform
capacity and
Platform downhill:
must be factored into total
1Retract boom.
2Lower boom.
platform load.
Primera edición • Tercera impresión
DANGER
Tip-over Hazard
Failure to match rated loads could result in an
overloaded platform, which could result in
machine tipping over.
When replacing platform, be
sure rated load on replacement
platform matches rated load on
machine serial number label.
Do not attach this platform to a
machine with any other rated
load.
1000262 B
DANGER
DANGER
Do not overload
platform.
Welder power supply
weighs 75 lbs / 34 kg.
97579 C
S-60X
82862
DANGER
97875
WARNING
Electrocution Hazard
Component Damage
Failure to properly connect
Hazard
and use the weld line to
Failure to properly
platform could result in death
connect weld leads
or serious injury.
may result in machine
or component
Read, understand and obey all
damage.
warnings and instructions
provided with welding power unit.
Turn welding power unit
off before connecting
Turn welding power unit off
leads.
before connecting leads.
Connect leads to twist-
Be sure weld cables are properly
lock connectors at
connected.
turntable and platform.
DC weld only: 40V, 300 amp
97875 A
maximum.
N.° de pieza T107102SP
114416
1000262
114389
97875
or 97579
147793
82862
28236