Set Up The Device Horizontally; Hang Up The Device - Oase UVC 400 Instrucciones De Uso

Set up the device horizontally

Observe the following conditions:
• Make sure that the mains connection is at least 6.6 ft (2 m) from the pond.
• Place the device so that the filter housing is always below the water level.
• Place the device horizontally on a firm, mud-free surface.
• Position the device so that the nozzle insert is above the water level.

Hang up the device

Observe the following conditions:
• Make sure that the mains connection is at least 6.6 ft (2 m) from the pond.
• Place the device so that the filter housing is always below the water level.
• Only operate the device without water feature.
• Screw the two screws into the filter base and hang the device on the two screws
with a cord. Fasten the cord on the side of the pond.
8
FTL0059
FTL0060