Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Determine gate size prior to installing gate posts. Pre-
1
planning prevents cutting boards (for privacy panels) and
ensures that the pickets are spaced evenly and accept
hardware correctly. The hinge swings 90° so remember
to plan the gate directional swing. The hinge mounts
to the large strap and therefore the hinge and the large
strap will face the direction of the gate swing (Fig. 1).
Gate should not exceed 5'.
NOTE:
For picket panels, a 3
the C-brackets on the horizontal rail (Fig. 2).
For either single or double gates, measure the width of
2
the opening (X). Subtract 7
for double gates to determine panel size (Fig. 3).
NOTE:
The provided hinge is self-closing. For a drive gate
application, the self-closing mechanism must be
deactivated (See "Hinge Tension Adjustment" on
Page 6.)
⁄
⁄
⁄
⁄ " clearance is required for
1
1
1
2
2
⁄ " for single gates and 14"
⁄
⁄
⁄
1
1
1
2
2
Fig. 1
Hinge
Fig. 2
3
⁄
⁄
⁄ "
⁄
1
1
1
2
2
clearance
required
Fig. 3
X-7
⁄ "
⁄
⁄
⁄ ⁄
1
1
1
2
2
Single
Gate
X-14"
Double Gate
3
Tabla de contenido
