Troubleshooting - Panasonic ER‑GD60 Instrucciones De Operación

Removing and mounting the blade
Removing the blade
Hold the trimmer and push the
blade with your thumb.
Mounting the blade
Fit the mounting hook (B) into the blade mounting (A) on the
trimmer and then push in until you hear a click.


14

Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service centre authorized by
Panasonic for repair.
Problem
The trimmer has become
blunt.
Operating time is short.
Trimmer stopped
functioning.
The trimmer cannot be
charged.
Makes a loud sound.
Action
Until problems are solved, please
follow each procedure as follows;
1. Charge the trimmer.
(See page 10.)
2. Clean the blade and apply oil.
(See page 13.)
3. Replace the blade.
(See pages 13 and 14.)
4. Have the battery replaced by
an authorized service centre.
Charge the battery for
approximately 8 hours
continuously to rejuvenate it.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.)
Contact an authorized service
centre for repair.
Insert the appliance plug into the
trimmer firmly.
Apply oil. (See page 13.)
Confirm that the blade is properly
attached.