Manual Mode; Program Mode; Keep Warm Operation - CASO DESIGN Coffee One 1850 Manual Del Usuario

13.5 Manual mode

If the plug is disconnected to the socket before using:
Plug in the coffee maker, touch the "ON/OFF" button. The display shows a solid blue light
and the coffee maker switches on. If the plug is connected to the socket before using:
Touch "ON/OFF" button, the LED display is activated, which will show the current time,
then touch "ON/OFF" button again, the light over "ON/OFF" button will be on, coffee maker
start to brew coffee. When brewing, if touch the "ON/OFF" button, the light over "ON/OFF"
button will be off, and the coffee maker stop brewing.
► At any status, long touch 2S of the "ON/OFF" button , the LED display and all indicator
light will be off, and coffee maker completely stop work.

13.6 Program mode

Touch the "PROG" button: the LED display blink "00 00" with blue color, the point" :" show
a solid blue light. (The display unit goes back into status before if no setting is entered
within 5 seconds). Touch the "H" button to set the time.
the minutes. The setting is validated automatically after 5 seconds.
Touch the "AUTO" button to activate the program function. The light over "AUTO" button
show a solid blue light. At the time programmed, the light over "ON/OFF" button show a
solid blue light and the coffee maker starts to operate.
Please note
► When you touch, after programming the time, the "ON/OFF" button (instead of "AUTO),
the light over "ON/OFF" button show a solid blue light and the coffee maker starts to
operate directly.
► You can cancel the program at any time by touching the "AUTO" button. The light over
"AUTO" button will turn off. To reactivate the program, touch the "AUTO" button again.
► Note on the two operating modes: The coffee maker automatically completely stops
operating after about 70 mins, if you haven't stopped it at the end of the cycle by long
touching the "ON/OFF" button, and the light over "ON/OFF" button turns off, LED
display turns off.

13.7 Keep warm operation

At any status, touch the "keep warm high/low" button, the keep warm mode will change
from high temperature mode -- low temperature mode --- high temperature mode -
..... When at low temperature mode, light over "keep warm high/low" button is off. When
the high temperature mode is rated, the light over "keep warm high/low" button is on with a
blue light.
Please note
► After brewing, the appliance will keep warm 30 minutes, then automatically completely
stop work.
caso
Touch the "M" button to set
34