Philips HR2020 Manual Del Usario página 8

EnglisH

The blender jar can be mounted in two positions: with the handle on the right side or on the left
side.
 Put the mains plug in the wall socket.
Using the blender
1 Put the ingredients in the blender jar.
 Put the lid on the jar and turn it until it is firmly fixed ('click').
 Insert the measuring cup into the opening in the lid (Fig. 5).
 Press speed button 1 or 2 to switch on the blender.
After processing, press the pulse/off button to switch off the blender. If you want to process
ingredients very briefly, use the pulse/off button instead of the speed buttons.
Do not let the appliance run for more than 3 minutes at a time. Let it cool down to room
temperature between processing cycles.
Tips
- If you want to crush ice cubes, put not more than 4 ice cubes (of approx. 25x35x25mm) in the
blender jar and press the pulse button a few times.
- Cut meat or other solid ingredients into smaller pieces before you put them in the blender jar.
- Do not process a large quantity of solid ingredients at the same time. To get good results, we
advise you to process these ingredients in a series of small batches.
- To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the
lid onto the rotating blades.
Disassembling the blender
1 Remove the mains plug from the wall socket.
 Remove the lid with the measuring cup from the blender jar.
 Turn the blender jar with the blade unit attached anticlockwise to remove it from the motor
unit.
 Clean all removable parts immediately after use (see chapter 'Cleaning').
Cleaning
Always unplug the appliance before you clean it.
Never immerse the motor unit in water, nor rinse it under the tap. Do not clean the motor unit
in the dishwasher.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Tip: Cleaning the appliance and its parts is easiest immediately after use.
1 Make sure the appliance is unplugged.
 Disassemble all removable parts.
Do not forget to remove the blender sealing ring.
Do not touch the blades. The blades are very sharp.
 Clean the motor unit with a moist cloth.
 Clean the removable parts in hot water with some washing-up liquid.
Note: All parts except the motor unit can be cleaned in the dishwasher.