General Information; Cleaning Of The Outer Parts (Daily / Weekly); Clean The Internal Parts (Monthly); Clean The Honeycomb (Every 6-8 Months) - Arneg Lisbona 2 Guía De Instalación Y Manejo

Lisbona 2
English
20. 2 General informati on
• The surfaces to be cleaned and the detergents and water used for cleaning must not exceed a
maximum temperature of 30°C.
• Accurately dry with a soft cloth;
CAUTION!
Fragile surfaces, glass. Dents, scratches, corrosion, wounds, broken glass
DO NOT aim the jet directly at the varnished or plasti cised surfaces
DO NOT apply the detergents directly onto the surfaces to be cleaned
DO NOT use steam cleaning equipment
Do not use excessive force
DO NOT bring the jet too close to the dirt. This may cause injury to the operator and conta-
minate parts that have already been cleaned, as well as the environment .
avoid detergents from coming into contact with nearby products.
CAUTION!
Floor products. Vapours. Corrosion Breathing diffi culty.
avoid contact, inhalati on.

20. 3 Cleaning of the outer parts (Daily / Weekly)

Clean all external parts of the cabinet every week See "General instructi ons" chap.20. 2.

20. 4 Clean the internal parts (Monthly)

Refer to chapters 20. 1 and 20. 2follow the steps given:
Pitch
1 remove all goods from the cabinet
2 remove all the removable parts, such as display dishes, grid trays, etc.
3 wash with lukewarm water (max 30°C)
4 disinfect using an anti bacterial detergent.
carefully clean the bott om tank, the drip, and the grid that protects the water drain, elimi-
5
nati ng all foreign bodies that have fallen through the sucti on grid lift ing the sheet of the fans.
6 carefully dry using a soft cloth
i
Should you noti ce ice built up, call a specialized technician.

20. 5 Clean the honeycomb (every 6-8 months)

Step
1 remove the screw that secures the honeycomb support (Fig.23)
2 remove the honeycomb
3 follow the steps given in chapters 20. 1 nd 20. 2
4 reassemble the honeycomb completely dry, at the same angle
20. 6 Clean specifi c materials
Material
Glass • use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C).
• Immediately remove all traces of
water and detergent with a dry
cloth in order to prevent marks
from forming and to prevent liquid
from reaching the gaskets, frame,
or the glass door hinges.
48
Remedy
Acti on
Acti on
What to avoid
DO NOT use hot water on cold glass surfaces;
the glass could crack and injure the operator.
DO NOT use rough or abrasive materials or
metal scrapers that could scratch the glass
surfaces
DO NOT use dirty cloths
05060167 00 09-08-2016