Total Working Hours; Hold Mode; Ignition Mode. Operation - GALAGAR INVERMIG SYNER 230 MP Bi-PULSE Manual Técnico De Instrucciones

3.8.3. TOTAL WORKING HOURS.

EQUIPMENT
OFF

3.9. HOLD MODE.

At the end of the welding process, the welding parameters are automatically memorised. This will be indicated
on the LCD screen with the word "HOLD".
D2- It will indicate the last average value of stored welding voltage.
D3- It will indicate the last average value of stored welding current.

3.10. IGNITION MODE. OPERATION.

SWITCH ON
GALA INVERMIG SYNER 230 MP Bi-PULSE
PULSE MAINTAINED DURING IGNITION
2 s
MANUAL Fe Ss CuSi
AlMg AlSi
FCAW
Ar CO 18% 2%
CEL
2
m/ mi n
IPM
PULSE
JOB
0.6 mm .023"
0.8 mm .030"
1.0 mm .035"
TIMER
1.2 mm .045"
mm in
HOLD h
V
%
Hz
ON
(LD1 and LD2 on)
2 s
A
S
%
Equip. Software release
model;
(power)
TOTAL INDICATION OF
ACCUMULATED HOURS IN
THE WELDING PROCESS
TIMER
h
PREVIOUS WELDING
MODE/JOB TO
SWITCHED OFF
68