Kohler K-300 Guía De Instalación Y Cuidado página 9

Copper
Tubing
2-7/8"
(73 mm)
For Finished-Deck or
Rim-Mount Only
2-3/8"
(60 mm)
6. Install the Valve Bodies
NOTE: Do not solder the connections at this time.
Cut two 2-7/8" (73 mm) pieces of copper tubing. For wider
installations, adjust this length accordingly.
Connect the copper tubing and tee to the valve body assembly.
Thread a mounting nut all the way down each valve body.
Slide a fiber washer, then a rubber washer down each valve body.
Insert the valve bodies up through the mounting holes so the
valve body marked "COLD" is on the right when facing the
faucet.
Temporarily hold the valve bodies in place.
For rough-deck installation proceed to "Install the Tubing."
Finished-Deck or Rim-Mount Only
Cut one 2-3/8" (60 mm) piece of copper tubing.
Insert the copper tubing into the tee and the supply tube.
Kohler Co.
2-3/8" (60 mm)
Copper Tubing
2-7/8" (73 mm)
Copper Tubing
9
Rubber
Washer
Fiber
Washer
Mounting
Nut
1275145-2-A