Idiomas disponibles
Idiomas disponibles
SIARR
08 - 85
PREPARATION
* Lower the spare wheel.
* Beneath the vehicle on the right hand side, unhook the electrical wires.
ASSEMBLY
* Fasten the towing arms onto the inside of the longitudinals
at points X (without tightening) using fastening kit X
* Fit the tow bar body to the points marked Y using
fastening kit Y
FINISHING
* Tighten the arms, then the tow bar body
to the torques stipulated below.
* Reassemble all of the components removed
during the above procedure.
FASTENING KIT
4 off HM12x45 screws
X
4 off CS12 washers
4 off 12/27 plain washers
4 off HM10x45 screws
4 off HM10 nuts
Y
4 off CS10 washers
8 off 10/22 plain washers
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
2 off HM16x45 screws
Z
2 off HM16 nuts
2 off DEC16 washers
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM0885-C - FOLIO NDMANG
Type
Type
Approval No.
Attelage pour
FORD Transit
e11*94/20*00*4700
Connect
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
307374600001
Max. Total
Max. Total
Max. Verti-
Authori. Weight Towable Weight
cal load
2 340 kg
1 200 kg
Value
D
75 kg
7,78 kN
