STACK-ON SS-22-MB-E Manual De Instrucciones página 4

BACK UP KEY
A "Back Up Key" has been provided in case you have
forgotten or lost your security code. To open the
safe using the back up key follow the steps below:
1. Remove the cover by pressing the tab and turning
the cover as shown in the illustration. The lock can
hang by the connecting cable while unlocking the
safe.
2. Insert the key in the key hole and turn clockwise
1/4 turn (until stopped) in order to unlock the safe.
Rotate the handle and open the door.
3. Keep the door open until you have entered a new
security code. Before entering your new code,
remove the key and screw the cover back in place.
4. Enter your new security code following the
instructions for entering your security code.
TAB
INSTALLATION OF SCOPE STAND-OFF
NOTE: The scope stand-off will function properly
for many combinations of guns with scopes.
Screw the scope stand-off into the pilot hole of the
barrel rest.
SHELVES
For selected models with adjustable shelving the
shelving can be installed by locating the shelf
clips to the desired locations and setting the shelf
in place.
For selected models with the door organizer the
top tray of the door organizer can be adjusted by
removing the two screws and relocating the tray.
IMPORTANT
Keep keys and combination number in a secure place, away
from children. Keep this record of your serial number and
combination in a secure place separate from your safe. To
order a replacement key set, follow the instructions on the
attached form.
STACK-ON PRODUCTS CO.
P.O. BOX 489
WAUCONDA, IL 60084
4
18
40248-1312