Technical Data; Angle Grinder - Bosch PWS 680-115 Manual Original

OBJ_BUCH-1824-003.book Page 21 Friday, December 12, 2014 11:06 AM
Sound emission values
determined according to
3 603 ...
EN 60745-2-3.
Vibration total values a
h
(triax vector sum) and
uncertainty K determined
according to EN 60745:
Surface grinding:
a
h
K
Disk sanding:
a
h
K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.

Technical Data

Angle Grinder

PWS ...
Article number 3 603 ...
Rated power input
Rated speed
Grinding disc diameter,
max.
Thread of grinder spindle
Thread length (max.) of
grinder spindle
Weight according to
EPTA-Procedure
01/2003 with standard-
auxiliary handle
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Angle Grinder PWS ...
Article number 3 603 ...
Rated power input
Rated speed min
Grinding disc diameter,
max. mm
Thread of grinder spindle
Thread length (max.) of
grinder spindle mm
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
PWS ... 780-125 7500
CA2 7.. CA2 4..
2
m/s 10.0 10.0
2
m/s 1.5 1.5
2
m/s 5.0 5.0
2
m/s 1.5 1.5
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
680-115 700
CA2 0.. CA2 0..
W 701 701
-1
min 11000 11000
mm 115 115
M 14 M 14
mm 21 21
kg 1.7 1.7
/II /II
700-115 720-115 730-115
CA2 4 .. CA2 4 ..
W 701 720
-1
12000 12000
115 115
M 14 M 14
21 21
7800 850-115
CA2 7.. CA2 7..
10.0 10.0
1.5 1.5
5.0 5.0
1.5 1.5
7-115 700-115
CA2 0.. CA2 0..
701 701
11000 11000
115 115
M 14 M 14
21 21
1.7 1.7
/II /II
750-115 750-125
CA2 4 .. CA2 4 .. CA2 4 ..
730 750 750
12000 12000 12000
115 115 125
M 14 M 14 M 14
21 21 21
English | 21
850-125 8000
CA2 7.. CA2 7..
10.0 10.0
1.5 1.5
5.0 5.0
1.5 1.5
7000 700-125
CA2 0.. CA2 0..
701 701
11000 11000
115 125
M 14 M 14
21 21
1.7 1.7
/II /II
75-115 7500
CA2 4.. CA2 4..
750 750
12000 12000
115 125
M 14 M 14
21 21
1 609 92A 0RY | (12.12.14)