Assembly - Attaching The Fan Blades; Attaching The Fan Blades - HAMPTON BAY 91133 Guía De Uso Y Cuidado

Assembly - Hanging the Fan (continued)
6
Mounting the fan-motor assembly
(close-to-ceiling mount)
WARNING: The locking slots of ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
□
Carefully unhook the fan from the mounting bracket (A) and
align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock in place. Immediately tighten
the two mounting screws firmly.
□
Install the two mounting screws (HH) and lock washers (GG)
(saved from Assembly Step 1 "Prepairing for mounting" into
the holes in the canopy (C) and tighten firmly.
□
You may now proceed to attaching the fan blades.

Assembly - Attaching the Fan Blades

1

Attaching the fan blades

NOTE: Your fan blades are reversible. Select the blade
side finish which best accentuates you decor.
□
Mount the fan blades (H) to the blade bracket (I) by aligning
the three key-slot holes in the blade (H).
□
Insert and tighten the three blade screws (FF) in the blade
bracket holes.
□
Repeat for the remaining blades (H).
2
Attaching the blade brackets
NOTE: Your fan blades are reversible. Select the blade
side finish which best accentuates you decor.
□
Fasten the blade bracket (I) to the motor (E) by
inserting the alignment post into the slot on the
bottom of the fan-motor assembly (E) and tightening
the motor screws.
□
Repeat for the remaining four blade brackets (I).
A
C
E
FF
H
I
E
I
11
Please contact 1-855-HD-HAMPTON for further assistance.
GG
HH
HAMPTONBAY.COM