Environmental Protection - GGP ITALY MCS 504 Manual De Instrucciones

Only blades with the following codes must be used on this
machine:
81004146/0
Blades must always be marked
tion, the above mentioned blade may be replaced in time by
others, with similar interchangeable and operating safety
characteristics.
Reassemble the blade (2) with the code and markings facing
the ground, following the order indicated in the illustration.
Tighten the central screw (1) using a torque wrench set to the
values specified for each type of blade.
4.2
In models with drive remove the guard (1) once or
twice a year by unscrewing the screws (2) and releasing the
couplings (3). Then clean carefully using a brush or com-
pressed air, removing the grass and dirt from the area around
the transmission and belt. Always refit the guard (1).
4.3
To recharge a flat battery, connect to the battery
charger (1) following the instructions in the battery mainte-
nance handbook.
Do not connect the battery charger directly to the engine ter-
minal. It is not possible to start the engine using the battery
charger as a power source, as it may get damaged.
If the machine is to remain inactive for a long period, dis-
connect the battery leads after making sure that the battery
is fully charged.

5. ENVIRONMENTAL PROTECTION

Environmental protection should be a priority of consider-
able importance when using the machine, for the benefit of
both social coexistence and the environment in which we
live.
– Try not to cause any disturbance to the surrounding area.
– Scrupulously comply with local regulations and provisions
for the disposal of waste materials after cutting.
– Scrupulously comply with local regulations and provisions
for the disposal of pakagings, oils, petrol, batteries, filters,
damaged parts or any elements which have a strong
impact on the environment; this waste must not be dis-
posed of as normal waste, it must be separated and taken
to specified waste disposal centres where the material will
be recycled.
– At the time of decommissioning, do not pollute the envi-
ronment with the machine, hand it over to a disposal cen-
tre, in accordance with the local laws in force.
Should you have any doubts or problems, do not hesitate to
contact your nearest Service Centre or your Dealer.
26
. Given the product evolu-