Kohler K-1647 Guia De Instalacion página 4

Control
Kit
4-1/2"
(11.4 cm)
60"
(152.4 cm)
Steam
Head
K-1569/K-1669
21" (53.3 cm)
Steam
Head
6"
(15.2 cm)
21" (53.3 cm)
Steam
Head
6"
(15.2 cm)
Review Layout
WARNING: Risk of personal injury. Do not install the Steam Control User Interface outside the
steam enclosure. The User Interface must be installed within the enclosure to allow the sensors to
regulate the temperature and control the flow of steam.
WARNING: Risk of scalding. Do not locate the steam head near a seat or bench, as the steam head
is hot during operation and may scald the user if touched.
NOTICE: It is recommended to locate the control kit and steam head on the same wall as the plumbing
controls. For optimum performance, do not locate the control kit directly above the steam head. Locate the
steam head 6" (15.2 cm) above the floor and a minimum of 4-1/2" (11.4 cm) from the threshold. The steam
head should always be located as far away from the seating area as possible.
Review the layout determined during the steam generator installation. See the steam generator installation
guide for more information.
Modules - Single Steam Head
1045320-2-G
12" (30.5 cm)
Steam
6" (15.2 cm)
Head
Control
Kit
4-1/2"
(11.4 cm)
60"
(152.4 cm)
Drain End
K-1683/K-1684
Control
Kit
4-1/2"
(11.4 cm)
60"
(152.4 cm)
Drain End
K-9486/K-9489
21"
(53.3 cm)
Control
Kit
11"
(27.9 cm)
60"
(152.4 cm)
6"
Steam
(15.2 cm)
Head
K-1687
4-1/2"
(11.4 cm)
Steam
Head
60"
(152.4 cm)
Drain End
K-1681/K-1682
4-1/2"
(11.4 cm)
Steam
60"
Head
(152.4 cm)
Drain End
K-9488/K-9496
4
Control
Kit
11"
(27.9 cm)
60"
(152.4 cm)
6"
Steam
(15.2 cm)
Head
K-1688
Control 21" (53.3 cm)
Kit
Steam
Head
6"
(15.2 cm)
Control 21" (53.3 cm)
Kit
Steam
Head
6"
(15.2 cm)
21"
(53.3 cm)
Steam
Head
Kohler Co.