Tabla de contenido
DV803
TECHNICAL DATA SHEET
RH/LH SERVICE UNIT WITH SLIDING DOORS, BE-FACIAL OR SINGLE SIDED:
Body manufactured in 18 mm thick wood conglomerate, coated in white or aluminium fi nish melamine and 1,5 mm thick ABS edge banding on the perimeter.
The sliding doors, when available, are manufactured in 18 mm thick wood conglomerate coated in white, bamboo green, poppy red, mustard yellow, umber, turquoise blue colour
melamine and have 1,5 mm thick ABS edge banding. Doors are fi xed through special hooks to the aluminium rails applied from the inside of the cabinet and more precisely n. 2 under
the top and n. 2 on the bottom. Push lock with two bendable keys with grey ABS key-caps.
N. 5 height adjustable feet in black ABS. For the connection of the service unit to the desk it is available a support with the same characteristics of the desk legs without base. Optional
drawer for this service unit, manufactured in wood conglomerate and coated with white or aluminium fi nish melamine; without lock.
FOLDING TABLE:
Worktop made of 25 mm thick wood conglomerate, with 2 mm thick ABS edge profi les. They are available with right angle and coated with white, light gray, light oak, dark oak or tobacco
oak melamine or with rounded corners, 45 mm radius, and coated with white, light oak, dark oak or tobacco oak melamine.
Metal structure consists of 2 vertical 80x60 mm rectangular-section steel tubes, 2,5 mm thick, with base made of moulded metal sheet 2 mm thick. All painted: or semi-gloss white or
embossed aluminium or embossed anthracite. The base is connected to the vertical frame by a chrome fi nished joint made of ABS. Each base has nos.2x70 mm diameter wheels in black
nylon with brake. At the upper end of the 2 uprights, there are 2 hinges in moulded ABS, to allow the rotation of the worktop. The locking handle, fi xed between the working plane and
the beam, is made of tubular metal 70x20 mm of 2 mm thick, and moulded ABS.
COUPLING FOR FOLDING TABLE:
They are used to connect folding tables online. Each kit consists of two pairs of polyamide hooks, to be fi xed under the worktop by means of suitable screws.
MODESTY PANEL FOR FOLDING TABLE:
t is made of black technical fabric and a metal tube of 16 mm diameter 2 mm thick. For fi xing it under the worktops, the supports are made of folded metal sheet 4 mm thick. The metal
parts are painted in embossed aluminum colour.
EXTENSION SIDE TABLES ON CARRYING PEDESTAL:
See on DV500-Storage, chapter carrying pedestal with 4 drawers or 3 drawers of which one fi le:
WORKTOPS:
Manufactured in 25 mm thick wood conglomerate, coated with white, light grey, light oak, tobacco oak or dark oak fi nish melamine and with 2 mm thick ABS edge profi les, or with
rounded corners, 45 mm radius, and coated with white, light oak, dark oak or tobacco oak melamine. Plagues for connection to the desk made of 2 mm thick pressed metal sheet,
aluminium coloured. It is possible to combine the telescopic metal beam to the extension with a further metal sheet plate 2 mm thick, which is fi xed between the pedestal and the
worktop.
CARRYING PEDESTAL:
(See on DV500-storage, chapter carrying pedestal with 4 drawers or 3 drawers of which one fi le).
FRONTAL PANELS:
This collection can be completed with different types of frontal panels (please check DV300-Accessories chapter).
40 mm FRONTAL PANEL FOR BENCH TABLES:
Consisting of a pinnable panel, in plywood 25 mm thick upholstered with red, green, blue and anthracite polyester fabric, and a perimeter of extruded aluminum. They are available in
two versions: H 59 cm (for bench with fi xed height "TYPE C") and H 79 cm (for bench with adjustable height with crank "TYPE A"). They are fi xed with a 120x40 mm zamak plate painted
in embossed aluminum colour.
N.B.: ALL METAL COMPONENTS ARE PAINTED WITH EPOXY POWDERS.
5
Tabla de contenido
