Tabla de contenido
DV803
TABLES WITH METAL STRUCTURE:
Desks, typing tables, compact and shaped desks, meeting tables, extension desks, are composed of following elements:
METAL LEGS WITH FIX HEIGHT ("Type C" Re: EN 527-1:2011 Norm):
• For single tables: Consists of a vertical 80x60 mm rectangular-section steel tube, 2,5 mm thick, with top plate and base made of moulded metal sheet 2 mm thick. All painted: or semi-gloss
white or embossed aluminium or embossed anthracite. The base is connected to the vertical frame by a chrome fi nished joint made of ABS. In the junction between the vertical frame and
the upper plate, there is a chrome fi nished lid made of moulded ABS. At the two ends of the upper plate there are two supports, made of moulded ABS, in white or aluminium or anthracite
fi nish; they allow the use of the leg in end or intermediate version. Nos.2 grey adjustable feet under the base.
• For typing tables in-line: Two versions are available. The fi rst one with the same characteristics of the metal leg for single tables; the second one hasn't the base and the bottom of the post
is equipped by an chromed ABS ferrule with gray levelling foot.
• For "bench" tables: Consists of two vertical 80x60 mm rectangular-section steel tubes, 2,5 mm thick, with top plate and base made of moulded metal sheet 2 mm thick; at their ends there
are two supports, made of moulded ABS, in white or aluminium or anthracite fi nish; they allow the use of the leg in end or intermediate version. Chromed ABS ferrules with gray levelling feet.
The uprights are joined together by a horizontal transverse tubular steel rectangular section 80x60 mm 2,5 mm thick, with two chromed ABS caps on the heads.
METAL COLUMN FIX HEIGHT ("Type C" Re: EN 527-1:2011 Norm):
Consists of a vertical 80x60 mm rectangular-section steel tube, 2,5 mm thick, with top plate and base made of moulded metal sheet 4 mm thick. All painted: or semi-gloss white or
embossed aluminium or embossed anthracite. The column is equipped by an chromed ABS ferrule with gray levelling foot. For the connection of the column with the beams of 120°
worktops, special joints made of ABS, in aluminium colour painted, are provided.
WIDE-BASE METAL COLUMN:
It is used for meeting tables and it is available in 2 versions:
• Consists of a vertical 80x80 mm section steel tube, 3 mm thick, with top plate diameter 490 mm of moulded metal sheet 8 mm thick, and square base 550x550 mm 10 mm thick.
All painted: or semi-gloss white or embossed aluminium or embossed anthracite.
• Consists of a vertical 80 mm round steel tube, with top plate diameter 490 mm of moulded metal sheet 8 mm thick, and round base 600 mm diameter 10 mm thick. All painted:
or semi-gloss white or embossed aluminium or embossed anthracite.
METAL LEGS WITH 2-STAGE HEIGHT ADJUSTMENT 65-86 cm WITH BOTTON ("Type D" Re: EN 527-1:2011 Norm - Sitting only):
It is made of an external vertical 80x60 mm rectangular-section steel tube, 2,5 mm thick and an internal 70x50 mm steel tube, 3 mm thick. The adjustment mechanism is positioned in the
inner tube and allows the height adjustment of the desk from a minimum of 65cm to a maximum of 86cm. It is operated by a button, positioned on outer tube, made of moulded ABS,
in white or aluminium or anthracite fi nish. The top plate and the base are made of pressed sheet metal 2 mm thick. All painted: or semi-gloss white or embossed aluminium or embossed
anthracite. The base is connected to the external vertical frame by a chrome fi nished joint made of ABS. Scroll ring between the two tubes is made of white or aluminium or anthracite,
moulded ABS. In point of union between the inner tube and the upper plate there is a closure cap, made of chromed ABS. At the ends of the top plate are two supports of moulded ABS,
in white or aluminium or anthracite fi nish, to allow the use of leg both in terminal or intermediate version. Nos.2 grey adjustable feet under the base.
METAL COLUMN WITH 2-STAGE HEIGHT ADJUSTMENT 65-86 cm WITH BOTTON ("Type D" Re: EN 527-1:2011 Norm - Sitting only):
Consists of an external vertical 80x80 mm section steel tube, 2 mm thick, and an internal 70x70 mm steel tube, 2 mm thick, with top plate of 4 mm thick. All painted: or semi-gloss white
or embossed aluminium or embossed anthracite. The adjustment mechanism is positioned in the inner tube and allows the height adjustment of the desk from a minimum of 65cm to a
maximum of 86cm. It is operated by a button, positioned on outer tube, made of moulded ABS, in white or aluminium or anthracite fi nish. The external tube is equipped by an chromed
ABS ferrule with gray levelling foot. For the connection of the column with the beams of 120° worktops, special joints made of ABS, in aluminium colour painted, are provided.
TELESCOPIC METAL BEAM DUCTED:
Made of moulded metal sheet 12/10 mm thick, it is composed of two semi-beams which slide within one another. Each semi-beam is equipped with a shaped plague, made of moulded
metal sheet 4 mm thick, to allow the fi xing to the leg. All embossed aluminium coloured. It is fastened to the worktop by a moulded ABS joint, aluminium fi nished. The beam is made with a
shape to allow the wire management. For the connection of the beam of the side extensions with the beam of the desks, two ABS connectors painted aluminium are provided.
METAL STRUCTURE WITH 3-STAGE HEIGHT ADJUSTMENT 65-125 cm WITH CRANK ("Type A" Re: EN 527-1:2011 Norm - Sit/stand):
• For single tables: composed by a 3-stage steel upright 2,5 mm thick with rectangular section. Part of the adjustment mechanism is positioned in the inner tubes and allows the height
adjustment of the desk from a minimum of 65cm to a maximum of 125cm. Top plate and base made of moulded metal sheet 2 mm thick. All painted: or semi-gloss white or embossed
aluminium or embossed anthracite. The base is connected to the external vertical tube with a chromed ABS junction. Scroll ring between tubes is made of white or aluminium or anthracite,
moulded ABS. In point of union between the inner tube and the upper plate there is a closure cap, made of chromed ABS. At the ends of the top plate are two supports of moulded ABS, in
white or aluminium or anthracite fi nish. Nos.2 grey adjustable feet under the base.
• For "bench" tables: composed by two 3-stage steel uprights 2,5 mm thick with rectangular section. Part of the adjustment mechanism is positioned in the inner tubes and allows the height
adjustment of the desk from a minimum of 65cm to a maximum of 125 cm. Top plate and base made of moulded metal sheet 2 mm thick. The uprights are joined together by a horizontal
transverse tubular steel rectangular section 80x60 mm 2,5 mm thick, with two chromed ABS caps on the heads. All painted: or semi-gloss white or embossed aluminium or embossed
anthracite. Scroll ring between tubes is made of white or aluminium or anthracite, moulded ABS. In point of union between the inner tube and the upper plate there is a closure cap, made
of chromed ABS. Nos.2 grey adjustable feet under the base.
• Metal beam: composed by a 40x40 section steel tube, 2,5 mm thick, in embossed aluminium fi nish.
Consists of a vertical 80x60 mm rectangular-section steel tube, 2,5 mm thick, with top plate and base made of moulded metal sheet 2 mm thick. All painted: or semi-gloss white or embossed
aluminium or embossed anthracite. Fastening to the metal legs is made by a joint of moulded ABS, in aluminium fi nish. Part of the adjustment mechanism is positioned in the beam and it allows
the height adjustment of the desk from a minimum of 65cm to a maximum of 125cm. It is operated by crank.
• Extension tables: The adjustable in height leg of typing tables in-line is available with base, with the same characteristics of legs for individual tables, or without base. The version without base
includes a chrome ferrule with gray levelling foot, at the lower end of the upright. The telescopic beam is made by an external 40x40 section steel tube, 2,5 mm thick, and an internal 30x30
mm steel tube, 2 mm thick, all in embossed aluminium fi nish. Scroll ring between the two tubes is made of aluminium coloured, moulded ABS. Part of the adjustment mechanism is positioned
in the beam and it allows the height adjustment of the desk from a minimum of 65cm to a maximum of 125cm. It is operated by the crank of the lateral table. Fastening to the metal legs
is made by a joint of moulded ABS, in aluminium fi nish. The fastening with the beam of the table is done through a joint in moulded ABS, aluminium fi nish, that hooks where the crank was.
WORKTOPS:
Made of 25 mm thick wood conglomerate, with 2 mm thick ABS edge profi les. They are available with right angle and coated with white, light gray, light oak, dark oak or tobacco oak
melamine or with rounded corners, 45 mm radius, and coated with white, light oak, dark oak or tobacco oak melamine.
CONNECTIONS:
Worktops made in 25 mm thick wood conglomerate, coated with white, light grey, light oak, tobacco oak or dark oak fi nish melamine and with 2 mm thick ABS edge profi les. For fi xing
semicircular connections to the desks, a special support bracket made in bent sheet metal and painted with embossed aluminium colour, it is provided. Some connections are equipped
with a special metal column made up of a metal tubular with 80x80 mm square section, and top plate 4 mm thick, painted: or semi-gloss white or embossed aluminium or embossed
anthracite. Ferrule in chromed ABS with grey leveller foot.
MODESTY PANELS:
Manufactured in 18 mm thick wood conglomerate, coated with white, light grey, light oak, tobacco oak or dark oak fi nish melamine and with 2 mm thick ABS edge banding on the
perimeter. The 2,5 mm thick brackets are available in semi-gloss white, embossed aluminium or embossed anthracite fi nish, to be fi xed to the metal legs of tables. When combined with
desks connected inline, close to the intermediate leg an extension of metal sheet 2,5 mm thick is added, for fi xing the modesty panel.
WIRE MANAGEMENT:
• Horizontal wire management for single tables: it is situated within the telescopic metal beams. The channel for cables is arranged to be equipped with clips for guiding cables and fi xing
Schuko sockets with special hooks in gray colored molded ABS. For the connection worktops a track made of PVC, with ABS cables-holder clips, is available.
• Horizontal wire management for "bench" tables: a channel for cables, made of folded metal sheet 8/10 mm thick, with anchoring brackets in metal sheet 2 mm thick, is available.
The brackets are fi xed to the abeam of the leg for "bench" tables. All in embossed aluminium painted. It can also be equipped with 4 and 6 guides cable holders, made of aluminium
coloured plastic.
• Vertical wire management: a special casing sheet applicable to the stem of the legs is available; vertical ABS spiral cable duct.
• Vertical wire management for height adjustment tables with crank "A type": a PVC channel, with cables-holder clips in ABS, is available.
(N.B. for further wire management solutions, please check DV300-Accessories chapter).
HANGED CPU HOLDER:
It consists of a bent metal pipe and a 2 mm thick folded metal sheet plate, painted in semi-glossy white, embossed aluminum or embossed anthracite .
All it is fi xed to the uprights of the legs of the tables with a suitable hook of 4 mm thick metal sheet.
HANGED PEDESTAL:
Manufactured in 18 mm thick wood conglomerate, coated in white or aluminium fi nish melamine and 1,5 mm thick ABS edge banding on the perimeter. Internal drawers are 12 mm thick
and wrapped in light grey PVC. Handle with 96 mm centres drilling, in satin aluminium fi nished zamak. Metal runners with soft-closing mechanism, lock with two bendable keys with grey
ABS key-caps. ABS spacers in the white and grey version.
HANGED STORAGE CABINET:
Manufactured in 18 mm thick wood conglomerate, coated in white or aluminium fi nish melamine and 1,5 mm thick ABS edge banding on the perimeter. Internal drawer Optional), 12 mm
thickness, wrapped in light grey PVC. Metal runners with soft-closing mechanism.
Door manufactured in 18 mm thick wood conglomerate, coated in white or aluminium fi nish melamine and 1,5 mm thick ABS edge banding on the perimeter. Soft closing, adjustable hinges
and lock with bendable key with grey ABS key-cap. Handle with 96 mm centres drilling, in satin aluminium fi nished zamak. White and grey special ABS spacers.
4
TECHNICAL DATA SHEET
Tabla de contenido
