Existing Construction Assembly Instructions - Utilitech 7105-06 Manual Del Usuario

EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS

MUST HAVE ACCESS TO THE ATTIC
BEFORE INSTALLATION: Turn off power source. Review all
safety precautions. Remove existing fan.
1. Measure the opening to ensure it is large enough to
accommodate the new fan housing (A) (9 in. x 9 in.).
2. If this fan is not replacing an old fan, be sure to cut a
9 in. x 9 in. opening for the fan housing (A).
3. Attach the duct connector (H) to the fan housing (A).
4. Insert suspension bracket I (E) into the bracket cover
on the duct connector side. Then, attach suspension
bracket II (F) and suspension bracket III (G) to the back
of the fan housing (A).
1
2
3
A
4
G
9
H
E
A
F