Existing Construction Assembly Instructions - Utilitech 7115-01 Manual De Instrucciones

NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
7. Pinch mounting springs (7.1) on grille (B) and insert
into narrow rectangular slots (7.2) inside the fan
housing (A). Push grille (B) up toward ceiling.
Turn on electricity at breaker box after finishing
installation.

EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS

Turn off electricity at breaker box before beginning
installation. Remove old fan.
1. Attach the duct connector (C) to the fan housing (A).
2. Unplug the fan power unit (2.1). Remove three
screws (2.2) that hold the fan motor assembly (2.3)
in place. Remove fan motor assembly (2.3) from fan
housing (A).
7
7.1 8.1
B
1
A
2
8
7.2 8.2
C
1. 1 2.1
A
2.3
1.2
2.2
A
7.1
8.1