Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONTENTS
1
GENERAL WARNINGS
1.1
SAFETY WARNINGS
1.2
WARNINGS FOR INSTALLATION
1.3
WARNINGS FOR USE
2
2.1
2.2
3
4
4.1
4.2
4.3
4.4
4.4.1 INSTALLATION
5
6
7
8
9
10
11
11.1
11.2
11.3
11.4
11.5
12
13
14
1 GENERAL WARNINGS
1.1 SAFETY WARNINGS
This installation manual is only intended for professional personnel. All the instructions must be read before proceeding with installation. Anything
not expressly stated in these instructions is not permitted; uses other than those intended may be a source of damage to the product and
endanger persons or property. The manufacturer declines all liability for failure to observe best technical practices in barrier system
construction and for any possible deformations that may occur when using the product. Keep this manual for future reference. The design,
the manufacturing of the devices that compose BORDER and this manual fully comply with the current standard. In consideration of potential
hazards that may arise during the installation and use of BORDER, also the installation procedures must be carried out in full compliance with the
applicable laws, standards and regulations; specifically:
1.2 WARNINGS FOR INSTALLATION
• Before starting the installation procedures make sure you have any additional devices and materials that may be required to complete the
BORDER barrier system in consideration of the specific application.
• The automation system must not be used until the transit area has been made safe.
• The packaging material must be disposed of in full compliance with the local regulations.
1.3 WARNINGS FOR USE
• Do not make any changes to any parts unless provided for by this manual. Operations of this type will only cause malfunctions. The
manufacturer denies all liability for damage resulting from modified products.
• Do not submerge parts of the automation in water or any other liquid substance. During the installation procedures ensure that no solid
objects or liquids penetrate inside the control unit or other open devices.
• If liquids penetrate any parts of the automation system, disconnect the electrical power supply immediately and consult technical service;
the use of BORDER in such conditions may give rise to potentially hazardous situations.
• Keep all parts of the BORDER barrier system away from heat sources and open flames; exposure to heat or flames may damage the
devices and cause faults, fire, or hazardous situations.
• When the system remains unused for a long time, remove the optional battery and store it in a dry place to avoid the risk of leakage of
harmful substances.
• Connect the control unit only to a power supply line equipped with a safety earth.
• Any operations that require parts of the BORDER barrier system to be opened must be performed with the control unit and the electrical
power supply disconnected; if the disconnect device is not clearly visible from where you are working, attach a warning notice to the
effect: "WARNING - MAINTENANCE IN PROGRESS".
• If automatic switches or fuses are tripped, the fault must be identified and eliminated before they can be reset.
• In case of a fault that cannot be resolved using the information in this manual, contact the help service.
COMUNELLO ®Copyright 2020 - All rights reserved
25
Capítulos
Tabla de contenido
