Placing Tool In Service - Ingersoll Rand 99V Serie Manual De Operación Y Mantenimiento

WARNING: Incorrect combinations of grinding wheel, wheel guard and tool speed could result in injury.
Correct combinations are specified below:
Guard Part Number
99V60–A216A
99V60–A216MA
99V60–206–7
99V60–106–9
99V77–106–7
LUBRICATION
Ingersoll–Rand No. 50
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
For USA– No. C31–06–G00
Before starting the tool, unless the air line lubricator is used,
detach the air hose and inject about 1.5 cc of oil into the air
inlet. For models with a built–in oiler, remove the Oil
Chamber Plug from the Cylinder Case and fill the chamber.
VERTICAL DEPRESSED CENTER WHEEL GRINDER
Model Free Speed
99V60P107
99V60P109
99V77P107
99V85P107M
Model Free Speed
99V45S106
99V60S106

PLACING TOOL IN SERVICE

Wheel Type
6 and 11
6 and 11
6 and 11
27 and 28
27 and 28
HOW TO ORDER A GRINDER
Type 27 and 28 Wheel
L. C. inches
6,000 7
6,000 9
7,700 7
8,500 7
VERTICAL CUP WHEEL GRINDER
Type 6 and 11 Wheel
L. C. inches
4,500 5 or 6
6,000 5 or 6
Wheel Diameter Maximum Wheel
in. (mm)
5 (127) or 6 (150)
5 (127) or 6 (150)
7 (180)
9 (230)
7 (180)
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
3
Maximum Speed
Thickness
in. (mm)
– – –
– – –
– – –
1/4 (6.4)
1/4 (6.4)
FILTER
COMPRESSOR
(Dwg. TPD905–1)
Spindle and Guard
5/8–11, 7"
5/8–11, 9"
5/8–11, 7"
5/8–11, 7"
Spindle and Guard
5/8–11, 6"
5/8–11, 6"
rpm
6,000
6,000
6,000
6,000
8,500