Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9

Enlaces rápidos

SB-110-HU1001
24 HOUR DISPOSABLE TUBING CONNECTION GUIDE FOR OLYMPUS
Using SCOPE BUDDY™ Flushing Aid
SCOPE BUDDY™ DISPOSABLE TUBING CONNECTORS
SCOPE BUDDY Disposable Tubing Delivery Tube
1
4
Forward Water Jet Connector
(see Connection Instructions on page 2)
2
Air Probe Tubing
5
Pinch Clamp
Fluid Intake Line
3
Suction Tubing
A
(see Connection Instructions on page 2)
ADDITIONAL REQUIRED ENDOSCOPE CONNECTIONS
CHANNEL PLUG
P/N CLM-220-HU1004
B1
B2
B5
B4
B3
B2, B3 not needed
ENGLISH
®
(Figure 1)
Channel Plug
B1
Align the channel plug with the piston ports
andpush to compress spring before sliding
the frame forward to fully engage.
A
Biopsy Channel Blanking Cap
(sold separately)
B4
Align rubber fitting with biopsy inlet and
push over inlet until fully engaged.
* Representative endoscope for illustrative purposes only.
For exact port locations, refer to endoscope manufacturer's instruction guide.
If you have any questions regarding SCOPE BUDDY 24 Hour Disposable Tubing connections, in the U.S., please contact
Medivators Technical Support at 1-800-444-4729. Outside the U.S., please contact your Medivators Distributor.
ENDOSCOPES
Locate the endoscope port* and follow the instructions for attaching the
corresponding Endoscope Connector. All connectors must be attached.
Pinch Clamp
(For use with endoscopes without
a Forward Water Jet Channel)
Pinch sides together until they
'click' to clamp.
READ ALL INSTRUCTIONS PRIOR TO CONNECTION
Suction Tubing
Align silicone tubing with suction
barb and push tubing onto barb
until fully engaged.
Forward Water Jet
Connector
(For endoscopes with a Forward
Water Jet Channel) Align with
forward water jet port, insert and
screw clockwise until fully engaged.
Important: Attach the FWJ
connector first, prior to any
other connectors.
Air Probe Tubing
Align tubing with air probe
and push tubing onto probe
until fully engaged.
Air/Water Blanking Cap
B5
Align the connector with the air/
water bottle port and push to
fully engage.
Tabla de contenido
loading

Resumen de contenidos para Olympus SB-110-HU1001

  • Página 9: Lea Todas Las Instrucciones Antes De La Conexión

    SB-110-HU1001 LEA TODAS LAS INSTRUCCIONES ANTES DE LA CONEXIÓN GUÍA DE CONEXIÓN DE TUBOS DESECHABLE 24 HORAS para endoscopios OLYMPUS ® Con la bomba de enjuague para endoscopio SCOPE BUDDY™ Localice el puerto del endoscopio* y siga las instrucciones para unir el correspondiente Conectores de tubos desechables SCOPE BUDDY™...
  • Página 10: Instrucciones De Conexión

    TIEMPOS DE ENJUAGUE PARA TUBOS DESECHABLES SCOPE BUDDY 24 HORAS Cuando utilice la bomba de enjuague para endoscopio SCOPE BUDDY y los tubos desechables SCOPE BUDDY 24 horas, todos los endoscopios OLYMPUS ® deberán ser lavados durante un tiempo programado de únicamente 60 segundos.
  • Página 15: Conexiones De Endoscopio Requeridas Adicionales

    SB-110-HU1001 LEA TODAS LAS INSTRUCCIONES ANTES DE REALIZAR LA CONEXIÓN GUÍA DE CONEXIÓN DEL TUBO DESCARTABLE DE 24 HORAS para endoscopios OLYMPUS ® con bomba de enjuague SCOPE BUDDY™ Ubique el puerto del endoscopio* y siga las instrucciones para anexar el Conectores del tubo desechable SCOPE BUDDY™...
  • Página 16: Diagrama De Conexión De La Bomba De Enjuague

    PROGRAMACIÓN DE LOS ENJUAGUES PARA EL TUBO DESCARTABLE DE 24 HORAS SCOPE BUDDY Cuando use la bomba de enjuague SCOPE BUDDY y el tubo descartable de 24 horas SCOPE BUDDY, todos los endoscopios OLYMPUS ® se deben enjuagar siguiendo una programación de solo 60 segundos.

Tabla de contenido