Westfalia SIARR 5058 Notice De Montage página 2

SIARR
5058
PREPARATION
* Detach the plastic protector under the vehicle.
* Make a cut in the protector as in close-up 1.
ASSEMBLY
* Insert the spacers D, with their bolting, inside
the side-members at point X on the vehicle.
* On the inside of the side-members, mount the arms A and B
at point X, insert the washers C between the side-members and
arms, and then fasten, without tightening, with bolting block X.
* Mount the coupling unit, and then fasten it, without
tightening, at points V – W using bolting kits V – W
FINISHING
* Tighten everything to the torques indicated below,
and in the following order : X – V – W.
* Refit the plastic protector.
* Fit the coupling head at point Y.
FASTENING KIT
2 HM10x30 cl8.8 screws
V
2 DEC10 washers
2 HM10x35 cl8.8 screws
W
2 DEC10 washers
2 HM10 cl8.8 nuts
X
2 HM12x60 cl8.8 screws
Y
2 HM12 cl8.8 nuts
2 DEC12 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
4 HM12x110 cl8.8 screws
4 DEC12 washers
4 HM12 cl8.8 nuts
4 12,5/30 ép.5mm (C) plain washers
4 20/32 thickness 10mm rubber washers
4 dia.12,5/22 Lg.70mm (D) spacers
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
!
Affix the sticker in the position
Type Type
SI063 Approval No.
Towbar for
e24*94/20*00*0093
Renault Laguna III Saloon
(Long Detachable Ball Joint)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM5000\NDM5058-A - FOLIO NDMANG
Close-up 1
Max. Total Max. Total
Authori. Weight Towable Weight
2 200 kg 1 500 kg
316261600001
Max. Verti- Value
cal load D
75 kg 8,80 kN