Safety Information - Portfolio VEL-112-9W-LED Manual De Instrucciones

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.
CAUTION
Turn off the main power at circuit breaker before installing fixture.
●
Save these instructions.
●
WARNING
All electrical connections must be in accordance with local and National Electrical Code standards. If you are unfamiliar
●
with proper electrical wiring connections, obtain the services of a qualified electrician.
This light fixture is designed to fit standard junction boxes as defined by the National Electrical Code. Please contact a
●
qualified electrician if you have any questions regarding the installation.
PREPARATION
Before beginning to assemble or install lighting fixture, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble, install or operate
the fixture.
Estimated Assembly Time: 30 – 45 minutes (Installation time will vary depending on skill level and existing wiring
conditions. Estimated installation time assumes standard wall junction box and supply wiring are already installed).
Tools Required for Assembly (not included): Phillips screwdriver, slotted screwdriver, wrench or pliers, electrical tape,
silicone caulking adhesive and caulking gun.
Helpful tools (not included): Wire cutters and/or wire strippers, step ladder.
ASSEMBLY INSTRUCTIONS
1. Turn OFF power to work area at main circuit breaker or fuse box. CAUTION: Do not
rely on the wall switch alone to turn off power.
2. Remove and save crossbar (CC) and screw (DD) from backplate (B). Attach the
crossbar (CC) to the junction box (not included) with the mounting screws (AA).
Hardware Used
Mounting screw
AA
Crossbar
CC
x 2
x 1
3
1
2
AA
CC
Lowes.com/portfolio